I finally got the time to start working on the frame.
The first things I noticed was that arms were not well glued and easily and with patience i take them apart piece by piece. It can be done with much care so you do not brake it.
Will be great if the manufacturer will sell them unmounted and unpainted.
With a little sand paper, allot of work and epoxy glue (A+B) I've put them back together after i removed some of the paint from the surface they will be glued on.
At the beginning i felt the arms to soft to hold on for the stress of flying but now after I re glued them they got allot of strength and I am confident they will withstand to any maneuvers i will make with my quadrocopter.
I will have to paint them again and i think i will choose X Quadrocopter flying so 2 red and 2 light grey.
I've also re glued the camera mount part.
I think the rest of the pieces will mount together with the plastic screws contained in the package. So actually this quadrocopter can be mounted and dismounted as many time you like, but i wold not recommend it.
I will try mount them with screws and also add some glue in some parts i will never unmounted.
I have to say that the plastic screws and nuts are very bad quality and i had to replace the plastic nuts with metal.
No comments:
Post a Comment